Given the seriousness of this subject, which concerns personal, operational and asset safety, and the fact that standards on the topic have been discussed for more than a hundred years, we still see a high level of unfamiliarity in this area — in the design premises companies set for their projects, in field application and in the large number of nonconformities found in installations.
In Roberval Bulgarelli’s text — The hundredth Brazilian “Ex” technical standard published by ABNT — some excerpts of which are summarized below, we can see an overview of how Brazilian standards in the Ex field have evolved:
“The Brazilian technical standards adopted from the ABNT NBR IEC 60079 (explosive atmospheres) and ABNT NBR ISO 80079 (mechanical “Ex” equipment) series, identical to the corresponding international standards, have been published or updated since 2005, when ABNT published the first Brazilian technical standard adopted from the ABNT NBR IEC 60079 series.
Brazilian standards on equipment and installations in explosive atmospheres related to the “Ex” segment have been published in Brazil since the late 1960s. ABNT began drafting Brazilian technical standards on explosive atmospheres in 1968, with the publication of the “experimental” draft standard P-EB-239 – Equipment with explosion-proof enclosures. In 1969, ABNT published the “experimental” draft standard P NB-158 – Electrical Installations in Environments with Flammable Liquids, Gases or Vapors.
The standards adopted in Brazil from the ABNT NBR IEC 60079 and ABNT NBR ISO/IEC 80079 (Mechanical “Ex” Equipment) series are identical in technical content, structure and wording, with no national technical deviations from the corresponding international IEC standards prepared by IEC TC-31, in accordance with ABNT Directive 3 – Adoption of international technical documents. Brazil is a participating member of IEC TC 31, with the rights and duties to submit comments to improve the standards and to take part in the review, update, voting and approval process.”
Publications and standards on the subject keep growing, raising the level of knowledge of professionals working in these areas. Even so, there is still a great deal of awareness work to be done on the importance of the topic.
In the past, these discussions were largely limited to representatives of the Oil & Gas, Chemical, Petrochemical, Grain Storage and Sugar & Ethanol sectors. However, they have been spreading to other segments where hazardous areas are also found, such as Pulp & Paper, Ports and Automotive.
Because of this lack of knowledge, many companies opt for more robust installations, applying protection types far beyond what the standards require, under the false impression that they are safer — which results in high implementation costs. Several protection types require special installation and maintenance criteria which, if not met, can invalidate the equipment’s protection.
As Michel Llory notes in his book Industrial Accidents – The Cost of Silence (Multimais Editorial – Funenseg, 1999):
“According to a document from the International Labour Office and the United Nations Environment Programme, 97% of accidents could be foreseen.”
In the case of the Challenger space shuttle, which exploded in 1986 73 seconds after launch, the “Rogers” report states that an engineer at the contractor that supplied the oxygen and hydrogen tank — the shuttle’s fuel — had warned about the risk of launching in the very low ambient temperature at Kennedy Space Center and recommended aborting the mission. Twelve hours before liftoff, this engineer stated:
“If anything happened, he would not want to have to explain it before the board of inquiry” (Rogers, 1986).
To ensure the safety of installations in explosive atmospheres, we list some of the main conditions that must be followed:
- Compliance with legislation for design, assembly and maintenance;
- Installation of Ex equipment with a certificate of conformity;
- Involvement of qualified professionals only for assembly, operation, maintenance and inspection.
A1 Engenharia has professionals with more than 30 years of experience in this field, working across a wide range of segments in Brazil and abroad, and offers:
- Consulting on Electrical Installations in Ex Areas;
- Specific training in accordance with NR-10 and NR-20;
- Area Classification Plans;
- Ex Equipment Specification;
- Conformity Assessment;
- Inspection of Equipment in Hazardous Areas;
- Support for the Certification Process.
_______________________
Nilson Cunha Júnior
Electrical, Instrumentation and Automation Manager – A1 Engenharia
Master’s candidate in Power Systems
Electrotechnical Technician
Industrial Electrical Engineer
Postgraduate in Maintenance Management/Project Management